TM-9-2815-224-34-P

ENGINE, DIESEL:8-CYLINDER TURBOCHARGED, DETROIT DIESEL CORPORATION MODEL 8V92TA

DIRECT SUPPORT AND GENERAL SUPPORT MAINTENACE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JANUARY 1988

TM-9-2815-224-34-P - Page 253 of 554

TM 9-2815-224-34&P

Exhaust Manifold Maintenance Instructions (Cont)

c. Installation.

NOTE

Instructions cover right hand exhaust manifold.

Installation of left hand manifold is the same.

(1) Install studs (1) if necessary.

(2) Tighten studs (1) to 25 to 40 lb-ft (34 to

54 N•m).

(3) Install gaskets (2) with crimped side facing

. . .

cylinder head (3).

NOTE

Manifold retaining washers are special

curved washers. Convex side must be

mounted toward manifold.

(4)

(5)

(6)

(7)

Install manifold (4) on studs (1).

Install three washers (5) and nuts (6)

loosely.

Install exhaust tube (7) with clamps (8).

Install but do not tighten two crabs (9)

and nuts (10).

CAUTION

Be sure to tighten nuts from

outward. Tightening outside

crack exhaust manifold.

center nut

nuts first can

(8) Tighten nuts (6 and 10) in the following

order:

(a) Tighten nut (6) to 30 to 35 lb-ft (41 to

47 N•m).

(b) Tighten nut (10) to 30 to 35 lb-ft (41 to

47 N•m).

d. Follow-on Maintenance.

(1) Install engine side panels

(TM 9-2320-279-10).

(2) Close engine cover (TM 9-2320-279-10).

END OF TASK

9-3/(9-4 blank)