TM-9-2815-224-34-P

ENGINE, DIESEL:8-CYLINDER TURBOCHARGED, DETROIT DIESEL CORPORATION MODEL 8V92TA

DIRECT SUPPORT AND GENERAL SUPPORT MAINTENACE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JANUARY 1988
TM-9-2815-224-34-P

  TM-9-2815-224-34-P - Page 261 of 554

TM 9-2815-224-34&P
Blower and Water Pump Drives Maintenance Instructions (Cont)
10-3. BLOWER ACCESSORY DRIVE HUB REMOVAL/INSTALLATION.
This task covers:
a. Removal
c. Installation
b. Cleaning/Inspection
d. Follow-on Maintenance
INITIAL SETUP
Models
All
Test Equipment
None
Special Tools
Tool, blower drive shaft alinement J24619 or
J33001
Supplies
Solvent, dry cleaning, Item 60, Appendix C
Personnel Required
MOS 63W, Wheel vehicle repairer
References
None
Equipment Condition
TM or Para
Condition Description
TM 9-2320-279-20 Engine cover removed.
TM 9-2320-279-20 Air compressor removed.
Special Environmental Conditions
None
General Safety Instructions
None
Level of Maintenance
Direct Support
a. Removal.
(1) Remove nut (1), copper washer (2), and screw (3).
(2) Remove three screws (4) and lockwashers (5).
(3) Remove two screws (6), lockwashers (5), cover (7), and gasket (8).
10-7


Back to Top