TM-9-2815-224-34-P

ENGINE, DIESEL:8-CYLINDER TURBOCHARGED, DETROIT DIESEL CORPORATION MODEL 8V92TA

DIRECT SUPPORT AND GENERAL SUPPORT MAINTENACE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JANUARY 1988

TM-9-2815-224-34-P - Page 411 of 554

TM 9-2815-224-34&P

Engine Governor Maintenance Instructions (Cont)

(7’)

Install two bushings (11), preformed packing (12),

washer (13), copper washer (14), and retaining ring (15)

on speed control lever shaft (10).

e. Installation.

NOTE

Apply a light coat of grease to both sides of

gasket before installing.

(1) Install gasket (1) on governor housing (2).

NOTE

When installing governor cover assembly,

speed control lever shaft pin fits into fork of

lever.

(2) Install governor cover assembly (3) with

five screws (4) and lockwashers (5).

(3) Install engine stop solenoid (6)

with washer (7), Iockwasher (8),

and nut (9).

f. Follow-on Maintenance. Install

throttle control air cylinder (para 15-8).

END OF TASK

15-19