TM 9-2815-224-34&P
Engine Tune-Up Instructions (Cont)
19-10. ENGINE SPEED CONTROL ADJUSTMENT (M984).
This task covers:
a. Maximum Load Speed Adjustment
c. Follow-on Maintenance
b. Engine Idle Speed Adjustment
INITIAL SETUP
Models
M984
Test Equipment
None
Special Tools
Shield, inlet J26554-A
Supplies
None
Personnel Required
MOS 63W, Wheel vehicle repairer (2)
References
None
Equipment Condition
TM or Para
Condition Description
Para 19-8
Throttle delay adjusted.
TM 9-2320-279-10 Engine side panels removed.
TM 9-2320-279-20 Air intake ducting removed.
Special Environmental Conditions
None
General Safety Instructions
None
Level of Maintenance
Direct Support
a. Maximum Load Speed
Adjustment.
NOTE
●
Engine speed control
adjustment for M984 Heavy
Duty Winch operation.
●
Tag and mark wires before
disconnecting.
(1)
Disconnect two wires (1)
from connectors (2) and
solenoids (3) on selector
valve (4).
19-27