TM 9-2815-224-34&P
Engine Tune-Up Instructions (Cont)
19-8. THROTTLE DELAY ADJUSTMENT (CONT).
(3)
Insert throttle delay cylinder pin
gage in fill hole in cylinder (3) using
0.072-in. end of gage. If gage goes
into hole, do steps (4) through (7).
(4)
Loosen two nuts (4) on U-bolt (5) and
insert gage.
CAUTION
Do not bend pin gage or use excessive force.
(5)
(6)
(7)
(8)
(9)
Rotate throttle delay lever (6) and
move piston (7) inward to contact
throttle delay cylinder pin gage.
Tighten two nuts (4) while lightly
pressing throttle delay lever (6).
Remove cylinder pin gage.
While keeping a light pressure
against cylinder gage insert 0.072-in.
end of pin gage. If adjusted correctly,
0.072-in. end will not go in, but
0.069-in. end will.
Remove both gages from cylinder
head (8).
b. Follow-on Maintenance.
(1)
Install throttle air cylinder (para 15-8).
(2)
Adjust engine speed (para 19-9).
END OF TASK
19-22
Change 2