19-18
TM9-2815-224-34&P
Engine Tune-Up Instructions (Cont)
19-6. INJECTOR RACK CONTROL LEVER ADJUSTMENT (CONT).
(25)
(26)
Connect fuel rod
clevis pin (19).
Install cotter pin
(20) to clevis lever (21)
(18).
with
NOTE
When moving from no fuel to full fuel, if injector rack is fully in before
position is reached, rack setting is too tight. Readjust injectors.
full fuel
(27)
Hold throttle control arm (16) in full fuel position. Using a screwdriver, press downward on
injector rack. Rack should tilt downward. When pressure is released, rack should spring back
upward. If injectors do not spring back, injector rack is too loose.