TM-9-2815-224-34-P

ENGINE, DIESEL:8-CYLINDER TURBOCHARGED, DETROIT DIESEL CORPORATION MODEL 8V92TA

DIRECT SUPPORT AND GENERAL SUPPORT MAINTENACE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JANUARY 1988

TM-9-2815-224-34-P - Page 488 of 554

TM9-2815-224-34&P

Engine Tune-Up Instructions (Cent)

19-6. INJECTOR RACK CONTROL LEVER ADJUSTMENT (CONT).

NOTE

Full fuel position is reached when

injector rack is completely in.

Adjust number one injector rack

control lever (right or left cylinder

head) first to establish guide for

remaining three cylinder control

racks,

Number 1 left and number 1 right

are only two preloaded cylinders.

CAUTION

Do not over tighten injector rack control

lever adjusting screws. Over tightened

screws can damage injector control tube.

(6) Soldier A pulls throttle control arm (16) to full fuel position and holds arm with light pressure

while Soldier B stands by to make adjustment.

(7)

While Soldier A maintains full fuel position, Soldier B tightens adjusting screw (14) until injector

control lever (17) starts slight rotation. Tight en additional 1/8 turn, then hold adjusting screw

and tighten locknut (13) to 24 to 35 lb-in (2.712

4.068 N°m).

19-12