TM9-2815-224-34&P
Engine Tune-Up Instructions (Cont)
(20) Connect fuel rod (7) to clevis lever (8) with clevis pin (6).
(21) Install cotter pin (5).
(22)
(23)
(24)
Hold clevis lever (21) out in full fuel position and tighten adjusting screw (14) until injector
rack (17) starts a slight rotation.
Hold adjusting screw (14) and tighten locknut (13) to 25 to 35 lb-in. (2.712 to 4.068 N°m).
Repeat steps (22) and (23) for remaining two injector control levers (27),
19-17