TM-9-2815-224-34-P

ENGINE, DIESEL:8-CYLINDER TURBOCHARGED, DETROIT DIESEL CORPORATION MODEL 8V92TA

DIRECT SUPPORT AND GENERAL SUPPORT MAINTENACE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JANUARY 1988

TM-9-2815-224-34-P - Page 501 of 554

TM 9-2815-224-34&P

Engine Tune-Up Instructions (Cont)

NOTE

When 0.004 (0.1016 mm) feeler gage is removed from

between cam and roller, injector control rack pressure

should hold injector rack gage at approximately a 45

degree angle. When 0.005 inch (0.127 mm) feeler gage

is placed between cam and roller, injector rack gage

should fall.

(8)

Verify proper adjustment by inserting a 0.005

inch (0.127 mm) feeler gage between cam (7)

and roller (6). If injector rack gage does not

fall, repeat steps (1) through (8).

b.

Follow-on Maintenance.

(1)

Install air intake ducting (TM 9-2320-279-20).

(2)

Install throttle air cylinder (para 15-8).

(3)

Adjust engine speed (para 19-9).

END OF TASK

Change 2

19-22.3