TM-9-2815-224-34-P
ENGINE, DIESEL:8-CYLINDER TURBOCHARGED, DETROIT DIESEL CORPORATION MODEL 8V92TA
DIRECT SUPPORT AND GENERAL SUPPORT MAINTENACE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
JANUARY 1988
TM-9-2815-224-34-P - Page 73 of 554
TM 9-2815-224-34&P
Engine Block Maintenance Instructions (Cont)
(3)
Coat end plate gaskets (3 and 4) with
grease and install on engine block (5).
NOTE
Some engines have five screws and
lockwashers. Others have flanged head
screws and no lockwashers.
(4)
Install front end plate (1), five screws (6),
lockwashers (7), two screws (8) and
lockwashers (9). Tighten screws (6 and 8)
finger tight.
NOTE
Smaller right hand camshaft end bearing
will be used as a pilot when alining front
end plate on engine block.
(5)
Install two camshaft end bearings (10)
into the front end plate (1).
(6)
Tighten five screws (6) to 35 lb-ft
(47 N•m).
(7)
Tighten two screws (8) to 75 lb-ft
(102 N•m).
(8)
Remove end bearings (10).
c.
Follow-on Maintenance.
Install camshafts
(para 7-9).
END OF TASK
Change 2
3-25
Back to Top
