TM 9-2815-224-34&P
Engine Block Maintenance Instructions (Cont)
3-3.
FRONT END PLATE REMOVAL/INSTALLATION.
This task covers:
a. Removal
c. Follow-on Maintenance
b. Installation
INITIAL SETUP
Models
All
Test Equipment
None
Special Tools
None
References
None
Equipment Condition
TM or Para
Condition Description
TM 9-2320-279-34
Engine mounted on
engine stand.
Para 7-9
Camshafts removed.
Supplies
Grease, automotive and artillery,
Item 36 Appendix C
Personnel Required
MOS 63S, Wheel vehicle repairer
Special Environmental Conditions
None
General Safety Instructions
None
Level of Maintenance
General Support
a.
Removal.
NOTE
Some engines have five screws and
lockwashers. Others have flanged head
screws and no lockwashers.
(1)
Remove live screws (1) and
lockwashers (2) from front end plate (3).
(2)
Remove two screws (4) and
lockwashers (5) from front end plate (3).
Change 2
3-23