TM-9-2815-224-34-P

ENGINE, DIESEL:8-CYLINDER TURBOCHARGED, DETROIT DIESEL CORPORATION MODEL 8V92TA

DIRECT SUPPORT AND GENERAL SUPPORT MAINTENACE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JANUARY 1988
TM-9-2815-224-34-P

  TM-9-2815-224-34-P - Page 74 of 554

TM 9-2815-224-34&P
Engine Block Maintenance Instructions (Cont)
3-4. REAR END PLATE REMOVAL/INSTALlATION.
This task covers:
a. Removal
b. Installation
c. Follow-on Maintenance
INITIAL SETUP
Models
All
Test Equipment
None
Special Tools
None
Supplies
Grease, automotive and artillery,
Item 36, Appendix C
Personnel Required
MOS 63W, Wheel vehicle repairer
References
None
Equipment Condition
TM or Para
Condition Description
TM 9-2320-279-34
Engine mounted on
engine stand.
Para 7-9
Camshaft removed.
Para 10-2
Blower drive support
removed.
Para 7-11
Idler gear removed.
Special Environmental Conditions
None
General Safety Instructions
None
Level of Maintenance
General Support
a.
Removal.
NOTE
Note direction of special washer during
removal to aid in correct installation.
(1)
Remove screw (1), special washer (2),
and dummy hub (3) from end plate (4)
(2)
Remove screw (5) and lockwasher (6)
from end plate (4).
NOTE
Some engines have four screws and
lockwashers. Others have flanged head
screws and no lockwashers.
(3)
Remove four screws (7) and
lockwashers (8) from end plate (4).
3-28
Change 2


Back to Top