TM-9-2815-225-34-P

ENGINE, DIESEL: 6 CYLINDER IN-LINE TURBOCHARGED, CUMMINS MODEL NTC-400

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JULY 2005

  TM-9-2815-225-34-P - Page 19 of 736

TM 9-2815-225-34&P
0001 00
0001 00-1
THIS WORK PACKAGE (WP) COVERS:
Scope; Maintenance Forms, Reporting Equipment Improvement Recommendations (EIRs); Corrosion
Prevention and Control (CPC); Destruction of Army Materiel to Prevent Enemy Use; Preparation for
Storage or Shipment; Warranty Information; List of Abbreviations; Quality of Material; Safety, Care
and Handling.
SCOPE
This manual contains repair procedures and supplemental data for the Cummins NTC-400 six-cylinder,
in-line, turbocharged diesel engine. The repair procedures in this manual are for use at direct support
and general support maintenance levels. All information contained in this manual applies to both
Big Cam I and Big Cam III engines except where differences are specifically noted.
MAINTENANCE FORMS
Department of the Army forms and procedures used for equipment maintenance will be those
prescribed by DA PAM 738-750, Functional Users Manual for The Army Maintenance Management
System (TAMMS).
REPORTING EQUIPMENT IMPROVEMENT RECOMMENDATIONS (EIR’S)
If your Cummins NTC-400 six cylinder diesel engine needs improvement, let us know. Send us an EIR.
You, the user, are the only one who can tell us what you don’t like about your equipment. Let us know
what you don’t like about the design or performance. The preferred method for submitting Quality
Deficiency Reports (QDRs) is through the Army Electronic Product Support (AEPS) website under the
Electronic Deficiency Reporting System (EDRS). The web address is: https://aeps.ria.army.mil. This is a
secured site requiring a password that can be applied for on the front page of the website. If the above
method is not available to you, put it on an SF 368, Product Quality Deficiency Report (PQDR), and
mail it to us at: Department of the Army, U.S. Army Tank-automotive and Armaments Command,
ATTN: AMSTA-LC-CHMM, 6501 E. 11 Mile Road, Mail Stop 420, Warren, MI 48397-5000. We’ll send
you a reply.
DIRECT SUPPORT AND GENERAL SUPPORT
MAINTENANCE MANUAL
INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)
FOR
M915, M915A1, M915A4, M916, M920 VEHICLES
P/N NTC400-3652-02
CUMMINS NTC-400 BIG CAM I DIESEL ENGINE
W/CONTAINER
P/N 11669835
CUMMINS NTC-400 BIG CAM III DIESEL ENGINE
W/CONTAINER
GENERAL INFORMATION


Back to Top