TM-9-2815-225-34-P
ENGINE, DIESEL: 6 CYLINDER IN-LINE TURBOCHARGED, CUMMINS MODEL NTC-400
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
JULY 2005
TM-9-2815-225-34-P - Page 21 of 736
TM 9-2815-225-34&P
0001 00
0001 00-3/4 blank
GENERAL INFORMATION (Contd)
END OF WORK PACKAGE
QUALITY OF MATERIAL
Material used for replacement, repair, or modification must meet the requirements of this manual. If
quality of material requirements are not stated in this manual, the material must meet the
requirements of the drawings, standards, specifications, or approved engineering change proposals
applicable to this Cummins engine.
SAFETY, CARE, AND HANDLING
Adequate safety precautions will be provided for the performance of maintenance operations. These
precautions will include safety in work environment, selection and usage of equipment, and procedures
provided for performing all operations. Inspection, which follows completion of maintenance procedures,
will ensure equipment compliance with applicable safety standards.
Supplies and materials such as cleaning fluids, sealers, adhesives, oils, and other products used in this
manual may be dangerous or harmful if safety precautions are not observed. Read manufacturers’
warnings and cautions on product labels before using and observe all recommended safety precautions.
Ensure proper procedures are followed during lifting of heavy items. Follow all warnings and cautions
identified in this manual.
Back to Top
