TM-9-2815-237-34

ENGINE, DIESEL: 8 CYLINDER, 6.2 AND 6.5, NORMALLY-ASPIRATED, DETUNED AND TURBOCHARGED

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

JULY 2004

CHANGE 2

TM-9-2815-237-34 - Page 231 of 267

TM 9-2815-237-34

2-41. ENGINE ASSEMBLY FROM SUBASSEMBLIES

(Cont’d)

z. Torsional Damper

1. Install woodruff key (9) in crankshaft (10).

2. Apply lubricating oil to seal surface (11) on torsional damper (8).

3. Install torsional damper (8) on crankshaft (10) far enough to install washer (7) and capscrew (6).

4, Hold flywheel stationary with pry bar and tighten capscrew (6) to 140-162 lb-ft (190-220 N•m).

2-185