TM-9-2815-237-34

ENGINE, DIESEL: 8 CYLINDER, 6.2 AND 6.5, NORMALLY-ASPIRATED, DETUNED AND TURBOCHARGED

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

JULY 2004
CHANGE 2
TM-9-2815-237-34

  TM-9-2815-237-34 - Page 224 of 267

TM 9-2815-237-34
2-41. ENGINE ASSEMBLY FROM SUBASSEMBLIES (Cont’d)
v. Fuel Injection Lines
1. Install number 1 and 3 injection lines (7) and connect t
O
fuel injection pump (1) and fuel injection
nozzles (4).
2. Using crowfoot wrenches, tighten four nuts (3) and fuel injection lines (7) on fuel injection nozzles (4)
and fuel injection pump (1) to 20 lb-ft (27 N•m).
3. Repeat steps 1 and 2 for each set of remaining fuel injection lines (7), number 5 and 7, number 6
and 8, and number 2 and 4.
4. Install four clamps (5) securing fuel injection lines (7) to support brackets (2) with four screw-
aesembled washers (6).
5. Install boot (8) onto fuel injection pump (1) and tighten clamp (9).
2-180


Back to Top