TM-9-2815-237-34

ENGINE, DIESEL: 8 CYLINDER, 6.2 AND 6.5, NORMALLY-ASPIRATED, DETUNED AND TURBOCHARGED

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

JULY 2004

CHANGE 2

TM-9-2815-237-34 - Page 219 of 267

TM 9-2815-237-34

2-41. ENGINE ASSEMBLY FROM SUBASSEMBLIES (Cont’d)

q. Fuel Injection Nozzles

1. Install four gaskets (3) and fuel injection nozzles (4) into cylinder head (1). Using injector nozzle

socket, tighten fuel injection nozzles (4) to 44-60 lb-ft (60-81 N•m).

2. Install three hoses (6) on fuel injection nozzles (4) with six clamps (5).

3. Install cap (7) on rear fuel injection nozzle (4) with clamp (5).

4. Repeat steps 1 through 3 for opposite side.

2-175