TM-9-2815-237-34

ENGINE, DIESEL: 8 CYLINDER, 6.2 AND 6.5, NORMALLY-ASPIRATED, DETUNED AND TURBOCHARGED

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

JULY 2004

CHANGE 2

TM-9-2815-237-34 - Page 212 of 267

TM 9-2815-237-34

2-41. ENGINE ASSEMBLY FROM SUBASSEMBLIES (Cont’d)

j. Fuel Pump

1. Apply OE/HDO to pushrod (8) and install into cylinder block (1).

2. Install gasket (2) and adapter plate (3) on cylinder block (1) with two capscrews (4). Tighten

capscrews (4) to 48-84 lb-in. (5-10 N•m).

3. Install gasket (5) and fuel pump (6) on adapter plate (3) with two capscrews (7). Tighten

capscrews (7) to 20-30 lb-ft (27-41 N•m).

2-168