TM-9-2815-237-34

ENGINE, DIESEL: 8 CYLINDER, 6.2 AND 6.5, NORMALLY-ASPIRATED, DETUNED AND TURBOCHARGED

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

JULY 2004

CHANGE 2

TM-9-2815-237-34 - Page 207 of 267

TM 9-2815-237-34

2-41. ENGINE ASSEMBLY FROM SUBASSEMBLIES (Cont’d)

e. Camshaft

1. Rotate cylinder block (7) 180°.

2. Apply OE/HDO to all bearing journals (12) and cam lobes (11) on camshaft (13).

CAUTION

Support camshaft during installation to prevent damage to

camshaft bearings.

3. Install camshaft (13) into cylinder block (7).

NOTE

Beveled edge of spacer must seat against front bearing journal

on camshaft.

4. Install spacer (10) and camshaft thrust plate (9) with two capscrews (14). Tighten capscrews (14) to

18 lb-ft (24 N•m).

2-163