TM-9-2815-237-34

ENGINE, DIESEL: 8 CYLINDER, 6.2 AND 6.5, NORMALLY-ASPIRATED, DETUNED AND TURBOCHARGED

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

JULY 2004

CHANGE 2

TM-9-2815-237-34 - Page 214 of 267

TM 9-2815-237-34

2-41. ENGINE ASSEMBLY FROM SUBASSEMBLIES

(Cont’d)

l. Fuel Injection Pump

1.

2.

3.

4.

5.

6.

7.

8.

Install gasket (5) and injection pump (6) on timing gear cover (3).

Install accelerator cable bracket (12) on fuel injection pump (6) with two capscrews (11). Tighten

capscrews (11) to 13 lb-ft (18 N•m).

Install idle return spring (8) on throttle lever (7) and accelerator cable bracket (12).

Align timing marks (4) on injection pump (6) and timing gear cover (3).

Install injection pump (6) to timing gear cover (3) with three washers (10) and nuts (9).

Rotate crankshaft until timing mark (14) on pump drive gear (13) is straight up.

Align timing marks (14) on pump drive gear (13) and pump driven gear (2) and install driven

gear (2) into timing gear cover (3).

Install three capscrews (1) on driven gear (2) and tighten capscrews (1) to 13-20 lb-ft (18-27 N•m).

2-170