TM-9-2910-226-34
PUMP, FUEL, METERING AND DISTRIBUTING, ASSEMBLY
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT, MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS
JUNE 1974
TM-9-2910-226-34 - Page 21 of 208
TM 9-2910-226-34
Figure 1-12. Metering and distributing fuel injection pump assembly (code A), right rear view.
1-2. Maintenance Forms and Records.
Maintenance
improvements.
Your letter or DA Form 2028
forms and records that you are required to use are
(Recommended Changes to Publications and Blank
explained in TM 38-750.
Forms) should be mailed direct to Commander,
1-3. Recommendation for Maintenance Publications
US Armv Tank-Automotive Command, ATTN:
Improvements.
You can help to improve this manual
AMSTA-M, Warren, MI 48090. A reply will be
by calling attention to errors and by recommending
furnished direct to you.
Section Il. DESCRIPTION AND DATA
1-4. Localization of Fuel Injection Pump Com-
C
.
As viewed from the governor end, the side on
ponents.
a.
In this manual, the terms defined in
b
the
viewer’s right will be the right side.
and
c
below will be used to describe the location of
1-5. General. a. The metering and distributing fuel
the fuel injection pump components.
infection pump assembly is a constant-stroke,
b.
The timing device end of the pump will be
distributing-plunger,
sleeve control type. The
called the front and the governor end the rear.
plunger is actuated by a camshaft and tappet
1-13
Back to Top
