TM-9-2910-226-34
PUMP, FUEL, METERING AND DISTRIBUTING, ASSEMBLY
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT, MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS
JUNE 1974
TM-9-2910-226-34 - Page 75 of 208
TM 9-2910-226-34
A ¼x1¼ fillister head screw.
B ¼-inch lockwasher
C Timing window cover
D Timing window cover gasket
E Assembled washer screw
F Control unit retainer
G Retaining pin
H Fuel control unit assembly
J Plunger sleeve pin
K Preformed packing
L 9/16-inch plain nut
M 9/16-inch lockwasher
N Overflow valve assembly
P Preformed packing
Q Oil filter
R Filter screw copper gasket
S Oil filter screw
T Pin
U Preformed packing
V Gasket
W Screw
X Operating lever stop screw
Y Operating lever stop
Z Retaining ring
AA Upper dust cover
BB Operating lever assembly
1 Lever clamping screw
2 Operating lever
3
¼-inch lockwasher
4 ¼-inch nut
CC Governor lead seal
DD No. 12x3/8 machine screw
EE No. 12 lockwasher
FF Fuel supply pump assembly
GG ¼x1¾ machine screw
HH
¼-inch lockwasher
JJ Fuel shut-off rod assembly
KK Shutoff rod gasket
LL Fuel supply pump gasket
MM Pipe to tube tee
NN Pipe nipple
PP Oil hose assembly
QQ 90° elbow
RR Woodruff key
Figure 3-37. Code F and G injection pump assemblies, partial exploded view.
3-18. Cleaning and Inspection.
a. Cleaning.
Immerse
passages thoroughly. Refer to TM 9-214 for care and
and clean all parts in dry-cleaning solvent,
maintenance of antifriction bearings.
specifications PS-661, and dry with compressed air.
b. Inspection and Repair.
Examine all threaded
Cover parts with a clean lint-free cloth and keep all
parts for worn or damaged threads. Minor thread
parts clean until assembly. Clean all fuel and oil
3-29
Back to Top
