TM-9-2920-225-34
GENERATOR ASSEMBLY; PRESTOLITE AMA-5102UT; LEECE-NEVILLE 3002AC, 3002AD, 3002AE, 5504AA, 5504AB, 2184AC, 5300GP
TECHNICAL MANUAL; MAINTENANCE; DIRECT AND GENERAL SUPPORT LEVEL
FEBRUARY 1981
TM-9-2920-225-34 - Page 41 of 262
TM 9-2920-225-34
2-6. ROTOR, STATOR, AND DRIVE END BELL ASSEMBLY.
TOOLS : No special tools required
SUPPLIES : Artillery and automotive grease, type GAA, MIL-G-10924
Solvent, dry cleaning, type II (SD-2) Fed. Spec P-D-680
Felt, 1/8-inch thick
Masking tape, PPP-T-42C
PERSONNEL: One
EQUIPMENT CONDITION :
Generator removed from vehicle, pulley removed from
generator.
a. Preliminary Procedures.
(1) Remove regulator assembly. Refer to para 2-3.
(2) Remove end housing and insulator. Refer to para 2-4.
(3) Remove intermediate housing. Refer to para 2-5.
b.
Disassembly.
CAUTION
Be careful when taking apart rotor, stator, and
drive end bell assembly. If any part is damaged,
generator is nonrepairable.
FRAME 1
1.
Take off nut (1), washer (2), and woodruff key (3) from shaft (4) of fan
and rotor assembly.
GO TO FRAME 2
I
2-25
Back to Top
