TM 9-2920-225-34
g.Replacement.
FRAME
1
1.
Hold rotor (1) and housing (2).
2.
Press drive end bell (3) and preformed packing (4) onto rotor shaft (1).
3.
Put in six screws (5).
4.
Put on spacer (6), guard washer (7) and nut (8).
5.
Turn rotor shaft (1) and check that there is no binding
6.
If there is any binding or scraping, do steps 1 through
END OF TASK
or scraping.
5 again.