TM-9-2920-225-34
GENERATOR ASSEMBLY; PRESTOLITE AMA-5102UT; LEECE-NEVILLE 3002AC, 3002AD, 3002AE, 5504AA, 5504AB, 2184AC, 5300GP
TECHNICAL MANUAL; MAINTENANCE; DIRECT AND GENERAL SUPPORT LEVEL
FEBRUARY 1981
TM-9-2920-225-34 - Page 61 of 262
TM 9-2920-225-34
e. Inspection and Repair.
FRAME 1
1.
2.
3.
4.
Check that screws (1), washer (2), pipe plug (3) and nut (4) are not bent or
broken and that they have no damaged threads. If parts are damaged, get
new ones.
NOTE
Readings must be within limits given in table 2-2. If
bearing is not within given limits, throw away bearing
and get a new one. If drive end bell is not within
given limits, generator is nonrepairable.
Check that drive end bell (5) is not cracked, warped or damaged in any way.
Measure bearing bore (6) in drive end bell.
If drive end bell is damaged or
worn, generator is nonrepairable.
Measure bearing (7) inner and outer diameters (8 and 9).
Refer to TM 9-214 to service bearing (7).
Get a new bearing if it is damaged.
END OF TASK
NOTE
CHECK ONLY THOSE PARTS WHICH
ARE CALLED OUT. PARTS WITHOUT
CALLOUTS ARE SHOWN ONLY FOR
REFERENCE PURPOSES.
TA103546
Table 2-2. Drive End Bell Assembly Wear Limits
Item /Point of Measurement
End bell bearing bore
Inside diameter of drive end
bearing
Outside diameter of drive end
bearing
2.0470 to 2.0475 None
0.7874 to 0.7870 None
2.0472 to 2.0467 None
2-45
Back to Top
