TM-9-2920-242-35
STARTER, ENGINE ELECTRICAL, ASSEMBLY MODEL 1113943, 1113904 AND 1113944
TECHNICAL MANUAL; DIRECT SUPPORT, GENERAL SUPPORT AND DEPOT MAINTENANCE INCLUDING REPAIR PARTS
SEPTEMBER 1964
TM-9-2920-242-35 - Page 13 of 110
5. DATA
Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
24 v dc
Torque (lock min) . . . . . . . . . . . . . . . . . .
26 1b-ft (at 500 amps, 3.5 volts)
Pinion speed (no load) . . . . . . . . . . . . . . . . . . . . . . . . . .
7000-10700 rpm
Pinion rotation (facing drive-end) . . . . . . . . . . . . . . . . . . . . . . . . clockwise
Number of teeth on clutch assembly (pinion) (one tooth blank) . . . . . . . . . . . . . . . .12
Mounting data:
Number of mounting holes.
.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3
Diameter of mounting holes . . . . . . . . . . . . . . . . . . . . . . . . . 0.6592 in.
Mounting hole circle diameter. . . . . . . . . . . . . . . . . . . . . . . . .
5.75 in.
Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
19.96 ± 0.12 in.
Diameter (field frame) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.56 ±
0. 04 in.
Weight (approx) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
65 lbs
4
Back to Top
