TM-9-2920-257-30-P
GENERATOR, ALTERNATING CURRENT, 200 AMPERES
TECHNICAL MANUAL; DIRECT SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS
MAY 1987
TM-9-2920-257-30-P - Page 78 of 111
TM 9-2920-257-30&P
D
- Reparable item. When beyond lower level repair capability,
return to depot.
Condemnation and disposal not authorized
below depot level.
L
- Reparable item. Repair, condemnation, and disposal not
authorized below depot/specialized repair activity level.
A
- Item requires special handling or condemnation procedures
because of specific reasons (i.e., precious metal content, high
dollar value ,
critical material ,
or hazardous material).
Refer
to appropriate manuals/directives for specific instructions.
c .
Federal Supply Code
for
Manufacturer
(FSCM).
The
FSCM
is
a
5-digit
numeric code listed in SB 708-42 which is used to identify the
manufacturer, distributor, or Government agency, etc.
d .
Part Number.
Indicates the primary number used by the manufacturer
(individual, company, firm, corporation, or Government activity), to
identify an item or range of items.
This part number controls the design
and characteristics of the item or range of items by means of its
engineering drawings, specifications standards, and inspection
requirements.
NOTE
When a stock numbered item is requisitioned, the item received
may have a different part number than the part being replaced.
e.
Description .
Indicates the Federal item name and, if required, a
minimum description to identify the item.
Items that are included in
kits and sets are listed below the name of the kit or set with the
quantity of each item in the kit or set indicated in the quantity
incorporated in unit column.
When the part to be used differs between
serial numbers of the same model, the effective serial numbers are shown
as the last line of the description.
f .
Quantity Incorporated in Unit.
Indicates the quantity of the item
used in the breakout shown on the illustration figure, which is prepared
for a functional group, subfunctional group, or an assembly. A “V”
appearing in this column in lieu of a quantity indicates that no specific
quantity is applicable (e.g., shims, spacers, etc.) .
C-6
Back to Top
