TM-9-2990-206-34P
TURBOSUPERCHARGER AlRESEARCH MODEL T18C01
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS)
TM-9-2990-206-34P - Page 43 of 85
3-7. GENERAL.
Section
IV. ASSEMBLY
before assembly, coat all parts with a
light film of engine oil (OE/HDO).
Turbosuperchargers
are
precision
products
and extreme care and cleanliness must be
exercised in all phases
of assembly oper-
3-8. PARTS KIT.
ations to insure satisfactory performance.
Dirt and dust are abrasive. After clean-
Parts Kit, Part No. 409448 (page B-9),
ing, inspection, and repair, and just
must be requisitioned and used to
assemble the turbosupercharger.
3-9
ASSEMBLY.
INSTALL RETAINING RING.
TOOLS:
Internal retaining ring plier s
NOTE
Retaining rings furnished in the Parts
Kit have one flat side and one rounded
side .
Be certain the retaining rings
are installed as instructed .
INSTALLATION:
1. Place center housing (A) on workbench with
large flange (B) up.
2.
Using internal retaining ring pliers (C),
install retaining ring (D) in second ring
groove with flat side of retaining ring
down .
TA097824
3-18
TM 9-2990-206-34&P
Back to Top
