TM-9-2990-206-34P
TURBOSUPERCHARGER AlRESEARCH MODEL T18C01
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS)
TM-9-2990-206-34P - Page 46 of 85
ASSEMBLY—Continued.
INSTALL THRUST RING, “O” RING, SPACER RINGS,
AND THRUST SPACER
INSTALLATION:
1.
Install thrust ring (A) with small outside
diameter down.
2.
Install “O” ring (B) in center housing groove.
Use care when installing spacer rings
(C). They may break if spread more
than necessary to clear the thrust
spacer (D).
3.
Install two spacer rings (C) on thrust spacer
(D) and stagger spacer ring gaps 180°
4. Install thrust spacer (with spacer rings
installed) (E) in backplate (G). Long
land (F) must enter backplate first.
TA097827
3-21
TM 9-2990-206-34&P
Back to Top
