TM-9-2990-206-34P
TURBOSUPERCHARGER AlRESEARCH MODEL T18C01
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS)
TM-9-2990-206-34P - Page 49 of 85
ASSEMBLY-Continued.
INSTALL CENTER HOUSING, HEAT SHIELD, AND
COMPRESSOR
HOUSING -
CONTINUED
3.
4.
5.
6.
Aline alinement marks scribed during
disassembly and install heat shield
(c)o
NOTE
If the turbosupercharger is
to be used on engine models
AVDS-1790-2DR the heat
shield is not used.
Apply a light coat of corrosion inhib-
iting, heat cured, solid film lubri-
cant (MIL-L-4601O) on bolts. Secure
center housing (B) and heat shield
(C) to turbine housing (A) with eight
lockwashers and bolts.
Torque
bolts to 275 pound-inches (31 N.m)
using 9/16 inch socket and torque
wrench.
Place clamp (0) over backplate (E)
and on heat shield (F).
Install “O” ring (G) on backplate
(E).
3-24 Change 1
TM 9-2990-206-34&P
Back to Top
