TM-9-3990-260-14-P

CONTAINER ROLL-IN/OUT PLATFORM (CROP) MODEL M3 AND MODEL M3A1

TECHNICAL MANUAL; OPERATOR’S, UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

JULY 2001

  TM-9-3990-260-14-P - Page 100 of 306

TM 9-3990-260-14&P
4-6
Table 4-1. Unit Maintenance Preventive Maintenance Checks and Services
Item
No.
Interval
Location
Item to
Check/Service
Procedure
Not Fully Mission
Capable If:
1
Semi-
Annually
M3 CROP
Primary
Structural
Components
Visually inspect all parts of the main
beams (1), lateral (2) and cross
members (3), and side and end beams
for:
Any part of the main
beams, lateral and cross
members, or side and end
beams have:
a.
A dent or bend that is greater than 3/
4 inch (19 mm) in depth.
a.
A dent or bend
greater than 3/4 inch (19
mm) in depth.
b.
A crack, break, cut, tear, puncture or
corrosive failure.
b.
A crack, break, cut,
tear, puncture or corrosive
failure.
c.
A missing, cracked or broken weld
at the juncture between any primary
component.
c.
A missing, cracked
or broken weld.


Back to Top