TM-9-3990-260-14-P
CONTAINER ROLL-IN/OUT PLATFORM (CROP) MODEL M3 AND MODEL M3A1
TECHNICAL MANUAL; OPERATOR’S, UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
JULY 2001
TM-9-3990-260-14-P - Page 202 of 306
TM 9-3990-260-14&P
9-17.
LOAD RESTRAINT PLATES (REAR) REPLACEMENT.
This task covers:
a. Removal
b. Installation
c. Follow-on Maintenance
INITIAL SETUP
Tools and Special Tools
Material and Parts
Tool Kit, General Mechanic's: Automotive
Cotter Pin (2 ea.), Appendix H, Table H-2,
(Item 5, Appendix I).
Item 11.
Cable.
Seizing Band (2 ea), Appendix H, Table H-2,
Item 9.
a.
Removal.
NOTE
•
This procedure shows replacement of one load restraint plate. Replacement is the
same for all three load restraint plates.
•
To prevent rotation, hinge pins (4) are tack-welded to hinge lugs (8). Before removal,
tack-weld must be broken.
(1)
Remove pin (1) from hinge of load restraint plate (2).
(2)
Remove two cotter pins (3), hinge pin (4) and load restraint plate (2) from deck (5). Discard
cotter pins.
Back to Top
