TM-9-3990-260-14-P

CONTAINER ROLL-IN/OUT PLATFORM (CROP) MODEL M3 AND MODEL M3A1

TECHNICAL MANUAL; OPERATOR’S, UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

JULY 2001

TM-9-3990-260-14-P - Page 195 of 306

TM 9-3990-260-14&P

a.

Removal.

NOTE

This procedure shows replacement of one twistlock. Replacement is the same for all four

twistlocks.

(1)

Remove set screw (1), handle (2) and spacer (3) from shaft of bayonet (4).

(2)

Remove twistlock (5) assembly from deck (6) of CROP.

(3)

Remove retainer screw (7), spring (8) and ball (9) from locator block (10).

(4)

Remove spring pin (11), locator block (10) and bayonet (4) from twistlock (5). Discard

spring pin.

b.

Installation.

(1)

Install bayonet (4) and locator blank (10) to twistlock (5) with spring pin (11).

(2)

Install ball (9), spring (8), and retainer screw (7) to locator block (10).

(3)

Install twistlock (5) assembly to deck (6) of CROP.

(4)

Install spacer (3), handle (2) and set screw (1) to shaft of bayonet (4).

c.

Follow-on Maintenance.

•

Lubricate grease fitting in accordance with Appendix K.

9-17