TM-9-3990-260-14-P

CONTAINER ROLL-IN/OUT PLATFORM (CROP) MODEL M3 AND MODEL M3A1

TECHNICAL MANUAL; OPERATOR’S, UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

JULY 2001

TM-9-3990-260-14-P - Page 188 of 306

TM 9-3990-260-14&P

Table 9-1. Unit Maintenance Preventive Maintenance Checks and Services - Continued

Item

No.

Interval

Location

Item to

Check/Service

Procedure

Not Fully Mission

Capable If:

7

Semi-

Annually

Bail Bar

Check bail bar (15) for wear. If wear at

lower back side of bar is greater than

1/4 in. (6.35 mm) or greater than 1/8 in.

(3.175 mm) at bottom of bar, notify

supervisor.

Wear found exceeds

specification.

8

Semi-

Annually

M3A1 CROP

Weldments

Visually inspect all weldments (16) for

cracks and other damage. Report

damage to supervisor.

Cracks or broken welds

are found that will

impair operation.