TM-9-6015
AIMING POST LIGHTS M14, M41 AND M43
TECHNICAL MANUAL
MARCH 1953
TM-9-6015 - Page 41 of 54
Section Ill. AIMING POST LIGH T
25. Test
r
Disassembly, Rebuild, and Assembly
M4 1
Follow procedures described for aiming post light M14, given in
paragraphs 21, 22, 23, and 24.
26. Differences-Aiming Post Light M41
Refer to table II for differences between aiming post light M41 and
other models.
A“otf. onlj- one
Ikittery
is
llsecl
in this (Init.
Therefore, OII]Y
011(? I):ltteI’y (’ont:i(t
:th, seml)ly is provi(lfxl in
the (w, se, and the
wiritlx
nrr:ln:wment differs ;1s ,shown
in figures 11 and 12.
otherwise,
assembly :Ind dis:lsselnhly of the unit is
identical with aiming l)ost light M14.
27. Interchangeability-Aiming Post Light M41
Aiming post light M41 is equipped with a green filter only and a
black opaque window (K of fig. 19) with a clear center strip which
may not be used with other lights.
Section IV. AIMING POST LIGHT M4 3
28. Test, Disassembly, Rebuild, and Assembly
Follow procedures described for aiming post light M14, described
in paragraphs 21, 22, 23, and 24.
29. Interchangeability-Aiming Post Light M43
With the exception of the case, all parts used in this unit are inter-
changeable with parts used in other models. The reflector disk (L,
fig. 20) is used only in aiming post light M43 (fig. 20) and is not
installed into other models.
3 5
Back to Top
