TM-9-6675-262-10
AIMING CIRCLE M2 W/E AND M2A2 W/E
TECHNICAL MANUAL; OPERATOR MANUAL
DECEMBER 2013
TM-9-6675-262-10 - Page 23 of 68
0004-3
DESCRIPTION/USE OF OPERATOR CONTROLS AND INDICATORS – (Continued)
NOTE
In fast azimuth traversing, the elbow telescope moves in multiples of 100
mils (for example, 100, 200, 300, etc).
The azimuth knob always repeats itself in the same relative position (for
example, 170, 270, 370, etc).
The azimuth micrometer scale reading is
not affected by fast traversing.
1.
For fast azimuth traversing of elbow telescope, pull and hold azimuth
knob (Figure 3, Item 1) in direction of the arrow labeled with a number 1.
By hand, turn main housing to desired azimuth.
Release azimuth knob
and turn azimuth knob for normal operation.
2.
For fast azimuth traversing of Aiming Circle, open covers on both
orienting knobs (Figure 3, Item 1) and (Figure 3, Item 2), pull and hold
orienting knob in direction of arrow labeled with a number 2.
By hand,
turn Aiming Circle to desired azimuth.
Release orienting knob.
Either
orienting knob can be turned for normal operation.
Close both covers.
Back to Top
