PS Magazine - FEBRUARY 1977

PS, The Preventative Maintenance Monthly

ISSUE 291

FEBRUARY 1977

PS Magazine - FEBRUARY 1977 - Page 11 of 35
tion can be a big proBlem on your
Sheridan, but here's what to do aboUt
it:
If the adjuster is already "frozen±',
;:±,.²³ =r´µ¶
·¸¹-
(MS15003-l).
When you do this² make
s³re you keep all parts of your body out
of the way Because the grease could
squirt out fast enough to h³rt you.
and use it to pUmp grease into the
track adjuster Until you have soft
grease coming o³t thE plUg hole.
Screw the pl³g back in and keep on
pumping
grease
through the l³be
fitting until yo³ get the track tension
you want.
If this doesn±t work, your track
adjuster is bad and must be replaced.
Once yo³ geR the adjuster "³n-
frozen´ yo³ can keep it in shape by
18
.
.±²
.,
:
Hav
µ
ing tro³bLe instalLing the air
fiLter in the housing on your
M5 51
or
M551Al
Sheridan?
A
¶little
GAA
on the housing seal
may help· Never use oiL¸ gasoline or
soLvent because they¹Ll just º³in The
seal.
º»¼_
r:±;²³´µ¶·¸¹º»¼½
»ike it says on page
2-128
of
TM 9¾
2350¿230À20ÁÂ
(Feb
75)
Fig¼
2-42,
appLy a light coat of
GAA
to the seal½
Not too mUch because t¾e excess wiLl
collect dirt and dust.
_±²³´
_
±²-³´µ¶·¸¹º»¼½¾¿ÀÁÂÃÄÅÆÇ
ÈJ


Back to Top
Back to Top