Stow
your
boresight
collimator
power cable in the sight case when You
aren't usIng It. THat'll keep it from
getting kicked around, damaged,
or
lost±
²F it is mispLaced,
don't rig up a
substItute. Get a New one witH ³S³
'58±±-01²143²9398.
_
On a ground moun´(tripod), keep tHe
cable Hooked to the sIght after You
·
boresight. ²t won't Interfere witH sight
operatIonµ- and it'll
¶
be protected from
damage or Loss.
Remove tHe lItHium batteries from
the power conditioner if You're not
going to use tHem f·r
30
daYs or more.
¸eat and HumiditY wil¹ make tHeM less
eºective in long»
confined storage.
Remove
batteries
durIng
perIods
of
inactivity
KeYwaYs and ¼eYs on TOW 2 cab¹e
connectors must be matcHed be½re YoU
pusH the connector¾ home and tighten
tHem.
¿He 2WÀP1 coi¹ caB¹e gets tHat ÁÂÁ
p¹us a wHo¹e new roÃtine.
Äe½re Yoà pusH tHe 2W
l
PÀ HoMeÅ
a¹ign tHe Ye¹¹ow mar¼ on tHe connecÆ
tor witH tHe Yel¹ow matiÇg ¹ine of tHe
(ÈGS) jac¼.
¿Ãrn the ¹oc¼ing ÇÃt Ãnti¹ Yoà can no
¹oÇger see tHe
red
Mar¼ on tHe JÀ jac¼.
¿he cab¹e's readY for wor¼!
WHetHer
YoÃ're
Hooking
Ãp
tHe
2W ÀP
I
or anotHer cab¹eÅ first eYeba¹¹
tHe fEmale connector Éor dirt or crud
wHicH can prevent a good connection.
CHeck tHe ma¹eÊ end for BeÇt pins.
;
¿Ime trials or wHateverÅ You've sti¹¹
got to ¹ine up tHe keYs and ¼eYwaYs
when You fit tHe connector to tHe J
l
jack
adapter
of
Your
basic
TOW
sYstem's missile guidance set (ÈGS).
²f Yoà trY to ½rce tHem together at an
angle» YoÃ'¹l break Ëhe Äake¹ite iÇsùaÌ
tion in the connector adapter of tHe JÀ .
When the Äake¹ite crac¼s» YoÃr sYstem
goes down and You've made a support
level
Í
repair job.
Îine 'em up. PÃsH 'em iÇ. ¿ighten
tHe s¹eeve on the connector. ¿ake an