PS Magazine - JULY 1985
PS, The Preventative Maintenance Monthly
ISSUE 392
JULY 1985
Do you really need to destroy A stub-
born brAke drum to get it of your
GAmA
GoAt?
BeFre
you
swing
·
A
sledgehAmMer, or light up A cutting
torch, try this:
Go by Steps L, 2 And 3 on PAge 12±23
o² T³ 9±2320±242±20±3´2µbut with the
tire
And
wheel
sti¶¶
moUNted.
This
weight will he¶p when you·
¸InstAll A 2 1/2±in long screw¹
ºSº 5305´00´719´5240µwhere you
took out the center screw» Turn it into the stub Axle until it bottoms out.
¸RAp the screw hArdµbut squArely ¸with the 3´lb bAll peen hA
er in your
ºo¼ 1 CommoN sHop set½ Keep it up until the screw heAd moves
m
Al
±
ost t¾
the drum¼ Tu¿ the screw out A little And hAÀMer some more. RepeAt thÁs until
tHe drum's loose eNough to pull of.
42
JUL 85
I² the screw´And´hAmMer metHod wonÂt worÃ, try thisÄ
ÅTAke of the tire And wHee¶¼ Ƽ tHen go by Steps ÇAnd2 in your ´20±3È2 T³.
¸Remove the whole shootin mAtchµbrAke drum thÉu stuÊ Ax¶eµAs A unit.
µËse the puller in your ºo½ Ç CommoN shop set to pull Ìhe sÌub Axle out
o² tHe brAke drum.
µÍinish up with Step 3 in your T³.
I² neither o² these methods work Alone, try tÎem botH At the sAme time¼
ImportAnt! BeÏre you instAll the brAÃe drum, cleAn the drum And Axle sp¶ines
with A wire brush. TheN ¶ube the sp¶ines with GÐÐ. ThisÂll mAÃe drum removAl
eAsier next time¼
Jul 85
43
Back to Top Back to Top
