Bradley Fuel Cap Repair Kit
M3-series Bradley. The new kit will also be added to the PMCS annual power
updated.
M1-Series Tank Screwdriver
5
/
16
inch wide by 4
inches long, for your tank. It replaces NSN
5120-00-517-6906, which is listed in
Appendix B of the -10-2 TMs and is no longer available. Make a note until the
TMs are updated.
M1-Series Tank Bore Brush
Is the bristle section worn out on your tank’s bore brush, NSN 1015-01-
209-3483? Don’t replace the whole brush. Get the bristle portion with NSN
M578 Tool Bracket
assembly for your M578 recovery vehicle. The NSN listed for Item 20
in Fig 83 of TM 9-2350-238-24P-2 is obsolete.
he auxiliary power equipment cover,
mand post carrier’s 4.2-KW generator
is designed to fit over the generator
before the generator is placed in its
storage box.
Unfortunately, there is so little clear-
ance between the generator and the
storage box that the cover won’t stay
on when the generator is placed in the
storage box. If you try to force it, the
cover gets ripped up. Pretty soon you’re
buying a new cover for about $100.
M577-Series Command Post Carriers . . .
top of the generator and strapping it
in
place on the storage box. The genera-
tor doesn’t get much protection that
way and the cover often blows away
in the field.
A better alternative is to have your
canvas shop make a new cover that
will fit around the outside of the stor-
age box. Two cargo straps, NSN 3990-
01-043-8466, around the cover keep it
firmly in place.
The new cover gets used, which pro-
tects the generator, and the cover lasts,
which saves your unit a lot of money.
PS 568
18
PS 568
19
MAR 00
here
are a few
thing
s...
...we
might
need.
..
...out
in the
field!
i hope they
don
’
t need
my
generator!
this rain
has
ruined
it!
Most operators either don’t use the
cover at all or try spreading it over the
Get new cover made to fit over
storage box and generator
Old cover doesn't protect generator well