MWO-9-2320-279-20-3
MODIFICATION OF M977 SERIES HEAVY EXPANDED MOBILITY TACTICAL TRUCK (HEMTT)
MODIFICATION WORK ORDER; INSTALLATION INSTRUCTIONS FOR NATO SLAVE RECEPTACLE RELOCATION
JULY 1992
MWO-9-2320-279-20-3 - Page 11 of 17
(4)
(5)
(6)
Remove nut (11) and install positive bat-
tery cable from NATO slave box (12) on
solenoid (13). Reinstall nut (11).
Remove nut (14) and Iockwasher (15),
and install negative battery cable (16)
from NATO slave box on starter (17).
Reinstall Iockwasher (15) and nut (14).
Install engine cover side panel and close
engine cover.
f. Installation of Battery.
Batteries
produce
explosive
gases. To prevent injury to per-
sonnel, keep sparks and flame
away. DO NOT smoke near bat-
teries.
(1)
MWO 9-2320-279-20-3
NOTE
If equipped with 6TL (green) bat-
teries, the batteries will be turned
90 degrees from illustration.
Install one front battery (1) in battery box
(2).
(2) Install one bracket (3) over carriage bolts
(4) with two nuts (5).
(3) Install one jumper cable assembly (6) on
two battery posts (7) with two screws (8)
and nuts (9).
9
Back to Top
