MWO-9-2320-279-20-3

MWO-9-2320-279-20-3 - Page 8 of 17

MWO 9-2320-279-20-3

b. NATO Receptacle Removal.

(1)

(2)

(3)

Remove screw (1), Iockwasher (2), and

positive battery cable (3) from NATO re-

ceptacle (4).

Remove screw (5), Iockwasher (6), and

negative battery cable (7) from NATO

receptacle (4).

Discard positive battery cable (3) and

(5) Remove top plate (10) and cover (11).

c Installation of NATO

Fender.

Slave Box on Left Front

negative battery cable (7).

NOTE

(4)

Remove four locknuts (8), screws (9), and

NATO receptacle (4), Discard locknuts

and screws.

(1)

In some models it may be easier to

drill holes from the underside of the

fender,

Use the slave box as a hole location tem-

plate. Place It on the left front fender as

shown. Mark the four mounting holes,

Remove the slave box and drill four holes

for 5/16 inch mounting screws.