MWO-9-2320-279-20-3

MWO-9-2320-279-20-3 - Page 7 of 17

MWO 9-2320-279-20-3

(6) Remove two nuts (12) and screws (13).

DO NOT pry between terminals

and top of battery. Prying can

cause damage to battery case. If

the cable cannot be removed by

hand from the post, use a terminal

remover tool.

(7) Disconnect two positive cable terminals

(14) from battery posts (15).

(8) Remove one nut (16), Iockwasher (17),

and screw (18) from front terminal (14).

(9)

Remove three positive battery cables (19)

and STE/lCE wire (20) from terminal (14).

(10) Remove two nuts (21), screws (22), and

jumper cable assembly (23).

(11) Remove two nuts (24) and one bracket

(25).

(12)

Using handles (26), lift out one front

battery (27).