MWO-9-2330-390-25-1
MODIFICATION WORK ORDER
MODIFICATION OF M1022A1 DOLLY SET; POSITIONING TUBE REINFORCEMENT
DECEMBER 2006
CHANGE 1
MWO-9-2330-390-25-1 - Page 4 of 54
MWO 9-2330-390-25-1
1. PURPOSE.
This modification provides reinforcement for the vertical positioning tubes during all
operations.
2. PRIORITY.
This modification is classified as ROUTINE.
3.
END ITEM TO BE MODIFIED.
NOTE
Application will be controlled/determined by PMLTV / PM Trailers based on
Approved DCSOPS distribution plans/funding streams for M1022A1.
NOMENCLATURE
NSN
PART
CAGEC
MODEL
Dolly Set: Lift,
Transportable Shelter,
7-1/2 ton
M1022A1
Vehicle National Stock Number (NSN) will not change as a result of this MWO.
4. MODULE (S) TO BE MODIFIED.
Not applicable
5. PART (S) TO BE MODIFIED.
NOMENCLATURE
NSN
PART NO.
CAGEC
Frame Section, Structural
* Front
8D00107-1
21439
* Rear
8D00141-1
21439
Frame Section, Structural
* Front
8D00106-1
21439
* Rear
8D00140-1
21439
6. APPLICATION.
a.
Time Compliance Schedule: The effective date of this MWO is 31 October 2005 and
its completion date is 01 October 2008.
b.
The Lowest level of Maintenance authorized to apply the MWO is Field Support
(FS) maintenance.
c.
Work force and man-hour requirements for application of the MWO to a single
unit, end item, or system:
Change 1
2
Back to Top
