SMI-9-2320-387-14P-1

TRUCK, UTILITY: EXPANDED CAPACITY

SUPPLEMENTAL OPERATION, MAINTENANCE, AND REPAIR PARTS INSTRUCTIONS

JULY 2004

SMI-9-2320-387-14P-1 - Page 112 of 671

10-93.1.

SOFT TOP REPAIR (M1152)

This task covers:

a. Inspection and Cleaning

d.

Window Zipper Repair (Temporary)

b. Material Repair

e.

Canvas Repair

c. Window Repair

INITIAL SETUP:

Applicable Models

M1152

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Materials/Parts

Sealing compound (Appendix C, Item 60.1)

Hook and pile material (Appendix C, Item 79)

Two plastic sheets (Appendix D, Figure D-117)

Green plastic canvas

(Appendix D, Figure D-118)

Six socket turnbuttons (Appendix G, Item 314)

Six grommets (Appendix G, Item 68.1)

Twelve clinch plate turnbuttons

(Appendix G, Item 330.1)

Manual Reference

FM 10-16

TM 9-2320-387-10

TM 9-2320-387-24P

Equipment Condition

Soft top enclosure removed, as required

(TM 9-2320-387-10).

SMI 9-2320-387-14&P-1

10-156.2

Change 4

a. Inspection and Cleaning

1.

Inspect soft top doors and tops for pin holes and leaks around the seam areas.

2.

Using soapy water solution and stiff brush, clean area to be sealed on the outer side of the canvas.

Allow to dry.

1.

Apply sealing compound to cleaned area where leak occurred. Ensure sealing compound is pressed

into stitching of seams.

2.

Allow 20 minutes for sealing compound to cure.

b. Material Repair