SMI-9-2320-387-14P-1
TRUCK, UTILITY: EXPANDED CAPACITY
SUPPLEMENTAL OPERATION, MAINTENANCE, AND REPAIR PARTS INSTRUCTIONS
JULY 2004
SMI-9-2320-387-14P-1 - Page 117 of 671
10-94.1. REAR BOW PIVOT BRACKET REPLACEMENT
This task covers:
a. Removal
b.
Installation
a. Removal
Remove two locknuts (6), washers (5), capscrews (1), washers (2), bow pivot bracket (3), and plate (7)
from body (4). Discard locknuts (6).
INITIAL SETUP:
Applicable Models
M1152
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Two locknuts (Appendix G, Item 77)
Manual References
TM 9-2320-387-10
TM 9-2320-387-24P
Equipment Condition
Bows removed (TM 9-2320-387-10).
b. Installation
Install plate (7) and bow pivot bracket (3) on body (4) with two washers (2), capscrews (1), washers (5),
and locknuts (6). Align bow pivot bracket (3) flush with side of body (4) and tighten two locknuts (6)
to 6 lb-ft (8 N
•
m).
FOLLOW-ON TASK: Install bows (TM 9-2320-387-10).
SMI 9-2320-387-14&P-1
Change 4
10-158.1/(10-158.2 blank)
1
2
3
4
5
6
7
Back to Top
