SMI-9-2320-387-14P-1
TRUCK, UTILITY: EXPANDED CAPACITY
SUPPLEMENTAL OPERATION, MAINTENANCE, AND REPAIR PARTS INSTRUCTIONS
JULY 2004
SMI-9-2320-387-14P-1 - Page 125 of 671
11-12.4. BALLISTIC CREW DOOR REAR STRIKER PLATE REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Applicable Models
M1151
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Tape (Appendix C, Item 78)
Manual References
TM 9-2320-387-24P
SMI 9-2320-387-14&P-1
Change 4
11-24.7
a. Removal
Remove two capscrews (4), washers (3), and rear striker plate (2) from body (1). Remove tape from rear
striker plate (2) and discard tape.
b. Installation
Apply tape to rear striker plate (2) mounting surface. Install rear striker plate (2) on body (1) with two
washers (3) and capscrews (4). Tighten capscrews (4) to 8 lb-ft (11 N
•
m).
Back to Top
