SMI-9-2320-387-14P-1
TRUCK, UTILITY: EXPANDED CAPACITY
SUPPLEMENTAL OPERATION, MAINTENANCE, AND REPAIR PARTS INSTRUCTIONS
JULY 2004
SMI-9-2320-387-14P-1 - Page 132 of 671
11-12.9. BALLISTIC CREW DOOR WINDOW STOP REPLACEMENT
This task covers:
a. Removal
b. Installation
a. Removal
1.
Remove two locknuts (2), screws (5), washers (4), and window stop bracket (6) from side rail (3).
Discard locknuts (2).
2.
Remove locknut (7), washer (8), screw (1), and pad (9) from window stop bracket (6). Discard
locknut (7).
CAUTION
If both window stops are being replaced, ensure ballistic window is
locked in the full up position to prevent damage to window.
INITIAL SETUP
Applicable Models
M1151
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Two locknuts (Appendix G, Item 133.3)
Locknut (Appendix G, Item 133.5)
Manual References
TM 9-2320-387-24P
b. Installation
1.
Install pad (9) on window stop bracket (6) with screw (1), washer (8), and locknut (7).
2.
Install window stop bracket (6) on side rail (3) with two washers (4), screws (5), and locknuts (2).
SMI 9-2320-387-14&P-1
11-24.14
Change 4
Back to Top
