SMI-9-2320-387-14P-1

TRUCK, UTILITY: EXPANDED CAPACITY

SUPPLEMENTAL OPERATION, MAINTENANCE, AND REPAIR PARTS INSTRUCTIONS

JULY 2004

SMI-9-2320-387-14P-1 - Page 128 of 671

11-12.7. BALLISTIC CREW DOOR WINDOW ASSEMBLY MAINTENANCE

This task covers:

a. Removal

c. Assembly

b. Disassembly

d. Installation

a. Removal

Pull out on window latch knob (4) and slide window (5) down and out from door side rails (1) and guide

channel (2).

INITIAL SETUP:

Applicable Models

M1151

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Materials/Parts

Sealing compound (Appendix C, Item 61)

Retaining ring (Appendix G, Item 254.1)

Manual References

TM 9-2320-387-24P

Equipment Condition

• Window stops removed (para. 11-12.9).

• Latch tube removed (para. 11-12.12).

d. Installation

Align window latch (3) with window guide channel (2) and push window (5) up into guide channel (2)

and door side rails (1).

b. Disassembly

1.

Remove latch knob (4) from pin (6).

2.

Remove retaining ring (9), pin (6), and spring (10) from window latch (3). Discard retaining ring (9).

3.

Remove four rollers (8) from guide pins (7).

4.

Remove four guide pins (7) from window (5).

c. Assembly

1.

Apply sealing compound to threads of guide pins (7) and install guide pins (7) on window (5) frame.

2.

Install spring (10) and pin (6) on window latch (3) with retaining ring (9).

3.

Apply sealing compound to threads of pin (6) and install latch knob (4) onto pin (6).

4.

Install four rollers (8) on guide pins (7).

SMI 9-2320-387-14&P-1

11-24.10

Change 4