SMI-9-2320-387-14P-1

TRUCK, UTILITY: EXPANDED CAPACITY

SUPPLEMENTAL OPERATION, MAINTENANCE, AND REPAIR PARTS INSTRUCTIONS

JULY 2004

SMI-9-2320-387-14P-1 - Page 209 of 671

11-68.1. DOUBLE AMMO BOX TRAY (CALIBER .50) REPLACEMENT (M1151)

This task covers:

a. Removal

b. Installation

a. Removal

1.

Remove two locknuts (9), washers (2), capscrews (3), and washers (2) from ammo box tray (1) and

wheelhouse (6). Discard locknuts (9).

2.

Remove two locknuts (8), washers (5), reinforcement brackets (7), capscrews (4), washers (5), and

ammo box tray (1) from wheelhouse (6). Discard locknuts (8).

INITIAL SETUP:

Applicable Models

M1151

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Materials/Parts

Four locknuts (Appendix G, Item 77)

Personnel Required

One mechanic

One assistant

Manual References

TM 9-2320-387-10

TM 9-2320-387-24P

Equipment Condition

Rear end of cargo shell door raised

(TM 9-2320-387-10).

b. Installation

1.

Install ammo box tray (1) on wheelhouse (6) with two washers (5), capscrews (4), reinforcement

brackets (7), washers (5), and locknuts (8).

2.

Secure ammo box tray (1) to wheelhouse (6) with two washers (2), capscrews (3), washers (2), and

locknuts (9). Tighten locknuts (9) and (8) to 6 lb-ft (8 N

•

m).

FOLLOW-ON TASK: Close cargo shell door (TM 9-2320-387-10).

SMI 9-2320-387-14&P-1

Change 4

11-128.13